Products

Workswell InfraRed Camera (WIC)
Workswell WIC are stationary LWIR thermal cameras for precise non-contact temperature measurements in laboratory and industrial environments. Workswell WIC offers several different sensor resolutions, which are 336x256px (WIC 336), and 640x512px (WIC 640) with sensitivity up to ≤0.03°C (30mK).

LEARN MORE
SMART Thermal Cameras
Workswell SMARTIS (Smart Thermal Imaging System) is the first sample of a new category of so-called intelligent thermal cameras. It is an all-in-one solution featuring a thermal camera, control unit, I/O card, as well as a TPC/IP interface integrated within a single casing including an in-built webserver allowing for communication with a superior system, including any PLC with this interface.

LEARN MORE
Workswell SMARTIS – Smart Thermal Imaging System
Workswell SMARTIS (Smart Thermal Imaging System) is the first sample of a new category of so-called intelligent thermal cameras. It is an all-in-one solution featuring a thermal camera, control unit, I/O card, as well as a TPC/IP interface integrated within a single casing including an in-built webserver allowing for communication with a superior system, including any PLC with this interface.

LEARN MORE
Workswell FS-SMARTIS/EX-SMARTIS – Smart Thermal Imaging System
Workswell SMARTIS (Smart Thermal Imaging System) is the first sample of a new category of so-called intelligent thermal cameras. It is an all-in-one solution featuring a thermal camera, control unit, I/O card, as well as a TPC/IP interface integrated within a single casing including an in-built webserver allowing for communication with a superior system, including any PLC with this interface.

LEARN MORE
Workswell ThermoInspector
The Workswell ThermoInspector parameterized NDT inspection system for inspecting quality in production and for fire-protection on dumps, incineration plants for communal waste and in warehouses and industrial operating units. The ThermoInspector system is well-established in numerous areas of industry: plastic, glass, steel, foundry, wood, paper and chemicals, etc.

LEARN MORE
Industrial ThermoInspector
The Workswell ThermoInspector parameterized NDT inspection system for inspecting quality in production and for fire-protection on dumps, incineration plants for communal waste and in warehouses and industrial operating units. The ThermoInspector system is well-established in numerous areas of industry: plastic, glass, steel, foundry, wood, paper and chemicals, etc.

LEARN MORE
Fire-Safety ThermoInspector
The Workswell ThermoInspector is a parameterized thermal imaging security system for inspecting the quality of fire protection at landfills, incineration plants for communal waste and in warehouses and industrial sites. The ThermoInspector system has been successfully proven to work in many operating units due to fast installation, easy operation and the universal character for each environment. This enables to prevent hazardous situations and fires that can damage property.

LEARN MORE
OEM ThermoInspector for FLIR
The Workswell OEM ThermoInspector system for FLIR thermal cameras is a parameterized thermal imaging inspection system (OEM kit) for the inspection of quality in production, quality control in production and for fire protection on landfills, incineration plants for communal waste, warehouses and industrial operating units. The ThermoInspector system has been proven to work in many various area of industry: plastic, glass, steel, foundry, wood, paper and chemical industries, etc.

LEARN MORE
Workswell WIRIS 2nd gen
Workswell WIRIS 2nd gen is currently the most state-of-the-art thermal imaging system designed for commercial unmanned aerial vehicles, so called drones. It is a compact system that combines a thermal camera, a digital camera (set to a visible spectrum), and a processor unit that has possibility to record radiometric data with a digital HDMI output, all in one case.

LEARN MORE
USB3 and GigE modules for FLIR TAU2 sensors
Workswell USB3 and GigE modules for FLIR TAU2 are designed to be integrated easily into extension systems or to be connected to a PC. The modules are compatible with all FLIR TAU2 9Hz/30Hz sensors (TAU2 640, TAU2 320/336, TAU2 160/162/168) and enable easy access to sensors data, their controls, and administration. FLIR TAU2 is operated and powered via a USB3 or a GigE interface by means of a Hirose 50-pin connector.

LEARN MORE
Protective Housings
“Workswell protective fixed housing for thermal cameras” (WHTC), a protective casing for LWIR thermal cameras, has been specifically designed for use in the demanding conditions of various industrial facilities, but also as a part of anti-fire and monitoring systems.

LEARN MORE
Workswell WHTC IP67
“Workswell protective fixed housing for thermal cameras” (WHTC), a protective casing for LWIR thermal cameras, has been specifically designed for use in the demanding conditions of various industrial facilities, but also as a part of anti-fire and monitoring systems.

LEARN MORE
Workswell EX-WHTC
“Workswell protective fixed housing for thermal cameras” (WHTC), a protective casing for LWIR thermal cameras, has been specifically designed for use in the demanding conditions of various industrial facilities, but also as a part of anti-fire and monitoring systems. Moreover, the casing has been certified for operation in potentially explosive environments, which includes the ATEX certification.

LEARN MORE
Protective case for thermal cameras FLIR Ax5
Protective case for thermal cameras from Workswell company is specifically designed and manufactured for a lasting protection of thermal imaging cameras FLIR Ax5 (FLIR A5, A15, A35, and A65). It ensures effective protection of thermal cameras against dust and water even in the very challenging conditions and industrial environment (it has IP66 ingress protection rate).

LEARN MORE
Our products
Workswell WIC are stationary LWIR thermal cameras for precise non-contact temperature measurements in laboratory and industrial environments. Workswell SMARTIS (Smart Thermal Imaging System) is the first sample of a new category of so-called intelligent thermal cameras. Workswell WIRIS 2nd gen is currently the most state-of-the-art thermal imaging system designed for commercial unmanned aerial vehicles, so called drones.

LEARN MORE
Workswell CorePlayer
Workswell CorePlayer software is designed for detailed analysis of thermograms (thermo vision images) and radiometric videos produced by the Workswell WIC thermal camera or thermovision systems for Workswell WIRIS drones. The system is also compatible with FLIR TAU2 after connection to our USB3 or GigE adapters.

LEARN MORE
Workswell software ThermoFormat
Workswell ThermoFormat is software designated for mass editing of measured data. This software can be used to set the temperature range, emissivity, palette or other parameters for a large number of thermograms produced by the Workswell WIRIS system or WIC thermal camera.

LEARN MORE
WIC SDK and development libraries
Workswell provides its WIC stationary thermal cameras with a wide range of WIC SDK development libraries. These development libraries contain the complete package for user software design and implementation for various operating systems and platforms.

LEARN MORE
Thermal Cameras for Drones
Workswell WIRIS 2nd gen is currently the most state-of-the-art thermal imaging system designed for commercial unmanned aerial vehicles, so called drones. It is a compact system that combines a thermal camera, a digital camera (set to a visible spectrum), and a processor unit that has possibility to record radiometric data with a digital HDMI output, all in one case

LEARN MORE
Thermal imaging camera for drones and UAV - Workswell WIRIS mini
Workswell WIRIS mini is a thermal imaging system designed for commercial unmanned air vehicles, known as drones (UAV), which, compared with the traditional version of Workswell WIRIS, has significantly smaller dimensions and weight. It is a compact system, which combines a thermal camera, digital camera (in a visible spectrum) with the processor unit with the option of a recording unit for recording radiometric data with a digital HDMI system. Data can be stored either in the internal memory or on an external micro SD card.

LEARN MORE
NTD system for active thermography - Workswell Active ThermoInspector
Workswell Active ThermoInspector (“Workswell ATI”) is an NDT (Non-destructive testing) system operating on the principles of what is known as active thermography.
In its basic configuration, the Workswell ATI system consists of a lamp (light / optical excitation source), a supply source, a thermal camera and a system controller. The flash light thermally excites the material under inspection.

LEARN MORE
Thermal Cameras for Trucks
Truck Infrared System (TIS) made by Workswell company is a complex thermal imaging system designed for use on firefighting vehicles. The whole system is based on a thermal imaging camera which can be controlled by PTZ system motors. The thermal imaging camera can be controlled remotely, directly from vehicle cabin, through a remote connection via a tablet.

LEARN MORE
UAV/Drone thermal imaging camera for gas detection - Workswell GIS-320
Under certain circumstances, infra-red cameras are highly suitable for detecting gas escapes and the presence of gas in the air. They can be also helpful during tests on improving environmental safety. A thermal camera can detect greenhouse gases in the air, as well as gas leaks, which are hazardous to the environment and can threaten human health.

LEARN MORE
Workswell TIS 640
Truck Infrared System (TIS) made by Workswell company is a complex thermal imaging system designed for use on firefighting vehicles. The whole system is based on a thermal imaging camera which can be controlled by PTZ system motors. The thermal imaging camera can be controlled remotely, directly from vehicle cabin, through a remote connection via a tablet.

LEARN MORE
Workswell - Intrinsically safe thermal imaging cameras
In our product range there are the thermal imaging cameras suitable for explosive environments, fitted with a protective cover designed in such the way that the cameras meet the demanding standards required in the industry. The covers are certified for operation in potentially explosive environments and have passed a number of certification tests, including ATEX certification.

LEARN MORE
Workswell thermal software
Workswell CorePlayer software is designed for detailed analysis of thermograms (thermo vision images) and radiometric videos produced by the Workswell WIC thermal camera or thermovision systems for Workswell WIRIS drones. The system is also compatible with FLIR TAU2 after connection to our USB3 or GigE adapters

LEARN MORE
Workswell ThermoConnector
Workswell ThermoConnector is an application made for adding plugin into DEWESoft X2 software. With this application user is able to add the plugin and use the special measurement and display functions supported by the DEWESoft X2 software.

LEARN MORE
Workswell InfraRed Camera (WIC)
Workswell WIC are stationary LWIR thermal cameras for precise non-contact temperature measurements in laboratory and industrial environments. Workswell WIC offers several different sensor resolutions, which are 336x256px (WIC 336), and 640x512px (WIC 640) with sensitivity up to ≤0.03°C (30mK).

LEARN MORE