Workswell InfraRed Camera (WIC)
Workswell WIC are stationary LWIR thermal cameras for precise non-contact temperature measurements in laboratory and industrial environments. Workswell WIC offers several different sensor resolutions, which are 160x128px (WIC 160), 336x256px (WIC 336), and 640x512px (WIC 640) with sensitivity up to ≤0.03°C (30mK). They can be connected by a USB3 interface (perfect for laboratory usage and PCB analysis) and GigE (suitable for industrial applications and integration with manufacturing processes). All WIC thermal cameras are calibrated during the manufacturing process and are delivered including a calibration certificate.
Workswell’s WIC in its USB3 variant has a very low energy consumption due to simple connectivity with a laptop, no need for an external power supply and an integrated analogue camera output. Both thermal camera variants can be easily attached to a production line or a tripod. The high ingress protection rate of its IP65 enclosure ensures the camera’s protection against external factors.
SMARTIS Infrared Camera
Workswell SMARTIS (Smart Thermal Imaging System) is the first sample of a new category of so-called intelligent thermal cameras. It is an all-in-one solution featuring a thermal camera, control unit, I/O card as well as a TCP/IP interface integrated within a single casing including an in-built webserver allowing for communication with a superior system including any PLC.
The Workswell SMARTIS thermal camera is designed for process automation and machine vision but can also be used for continuous measurements of temperature in metrological and research applications. The SMARTIS thermal camera has been designed for use in process automation so that it can autonomously control a smaller process however, its part can also become a part of the control system. Therefore, it has been equipped with a TCP/IP interface (Ethernet 100Mb/sec, RJ-45) which is complemented with digital inputs and analogue outputs (current loop 0-24 ma/12 V).
Workswell WIRIS 2nd gen
The Workswell WIRIS 2nd gen is currently the most state-of-the-art thermal imaging system designed for commercial unmanned aerial vehicles, such as drones. It is a compact system that combines a thermal camera, a digital camera (set to a visible spectrum) and a processor unit that is able to record radiometric data and output it to a digital HDMI port all in one case.
Workswell WIRIS 2nd gen is a revolutionary product within its category, mainly due to the real-time camera control (via standard RC radio transmitter) directly on the drone, providing many options. Using only one button it is possible to remotely save full radiometric imaging data (single pictures and videos), change temperature scale settings, measurement parameters (emissivity and apparent reflected temperature), temperature alarms, etc. These possibilities make the system unique
The Workswell ThermoInspector parameterized NDT inspection system for inspecting production quality and fire-protection for dumps, incineration plants, communal waste, warehouses and industrial operating units. The ThermoInspector system is well-established in numerous areas of industry: plastic, glass, steel, foundry, wood, paper and chemicals, etc.
The Workswell ThermoInspector is a parameterized thermal imaging security system for inspecting the quality of fire protection at landfills, incineration plants, communal waste, warehouses and industrial sites. The ThermoInspector system has been successfully proven to work in many operating units due to fast installation, easy operation and the universal interface for each environment. This allows you to prevent hazardous situations and fires that can damage your property.
OEM ThermoInspector for FLIR
The Workswell OEM ThermoInspector system for FLIR thermal cameras is a parameterized thermal imaging inspection system (OEM kit) for the for inspecting the quality of fire protection at landfills, incineration plants, communal waste, warehouses and industrial sites. The ThermoInspector system has been proven to work in many various area of industry: plastic, glass, steel, foundry, wood, paper and chemical industries, etc.
USB3 and GigE modules for FLIR TAU2
Workswell USB3 and GigE modules for FLIR TAU2 are designed to be integrated easily into extension systems or to be connected to a PC. The modules are compatible with all FLIR TAU2 9Hz/30Hz sensors (TAU2 640, TAU2 320/336, TAU2 160/162/168) and enable easy access to sensors data, their controls, and administration. FLIR TAU2 is operated and powered via a USB3 or a GigE interface by means of a Hirose 50-pin connector. The whole internal electronic content is protected by an aluminium case.
Workswell’s CorePlayer software automatically identifies the USB3 or GigE interface, FLIR TAU2 core type, or a faulty IP address setting. Depending on the core, the resolution is set to 8 or 14 RAW data formats.
Workswell WHTC IP67
“Workswell protective fixed housing for thermal cameras” (WHTC), is a protective casing for LWIR thermal cameras, has been specifically designed for use in the demanding conditions of various industrial facilities, but also as a part of anti-fire and monitoring systems.
“Workswell protective fixed housing for thermal cameras” (WHTC), is a protective casing for LWIR thermal cameras, which has been specifically designed for use in the demanding conditions of various industrial facilities, but also as part of anti-fire and monitoring systems. Furthermore, the casing has been certified for operation in potentially explosive environments and has a ATEX certification.
Protective case for thermal cameras FLIR Ax5
Protective case for thermal cameras from Workswell company are specifically designed and manufactured to ensure lasting protection of thermal imaging cameras FLIR Ax5 (FLIR A5, A15, A35, and A65). It ensures effective protection of the thermal cameras against dust, water even in very challenging conditions and industrial environments (it has IP66 ingress protection level).
Workswells CorePlayer software has been designed to perform detailed analysis and allow a user to edit, export data to different formats, and create comprehensive reports from thermograms. All standard functionalities for analysing data are available within the program (temperature on the spot, minimum and maximum of the area, temperature profile, zoom, change in temperature scale, color palette, emissivity etc.) as well as extending functions such as the GPS location of where the picture was taken and being able to display full spectrum digital pictures. See the data list for further information on all functionalities.
Our ThermoFormat software is designed mainly for batch administration of recorded thermograms. If you need to change the color palette, emissivity, or temperature scale in all the recorded thermograms then the ThermoFormat will saves you a lot of time as it can preform all of these functions. The ability to export recorded thermograms with EXIF metadata to create photogrammetry and 3D models can also be accomplished using this software.
Workswell ThermoFormat software is used for batch editing and export of the pictures (for example in order to create 3D models).
WIC SDK and development libraries
Workswell provides its WIC stationary thermal cameras with a wide range of WIC SDK development libraries. These development libraries contain the complete package for user software design and implementation for various operating systems and platforms.
The WIC Software Development Kit (SDK) is available for both Windows operating systems and Linux distributions. Older x86 processor PC platforms are supported as well as modern single-board systems on the basis of ARM, such as ODROID, Raspberry, NVIDIA, Tegra and Jetson. The client can choose a development library in the format of .dll, Labview VI, Matlab Simulink or Dewesoft plugin. This means that you can achieve an optimized output of the final application and significantly reduce the total time of implementation. If necessary, questions can be submitted to the development team at Workswell.