SAFETIS Control Unit – central unit of the SAFETIS system

Centrální jednotka systému SAFETIS. Umožňuje propojení až 16 termokamer. PS_32

SAFETIS Control Unit is central unit of the SAFETIS system, which was developed for the demanding and continuous detection of the risk of fire before occurrence. The SAFETIS Control Unit enables to work with up to 16 thermal cameras in the SAFETIS system with any construction (i.e. IndoorOutdoor and others).

SAFETIS thermal cameras can be configured, stream images, etc. independently using the built-in Web-server. The SAFETIS Control Unit provides the system with a high level of integration and a series of advanced functions.

INQUIRY FOV Calculator

Advanced functions

  • Continuous recording of radiometric data and trends with information about the surface temperature measured. This concerns a full log from which it is possible to analyse events that took place later.
  • Pretrigger – i.e. option
  • Advanced functions of the analysis of temperature trends, detection of sudden changes and filtration

Recording and visualization

  • Expanded visualization options
  • Periodical recording of radiometric sequences
  • Automatic or manual recording of radiometric images and sequences
SAFETIS_Control_Software_screenshot_4
SAFETIS_Control_Software_screenshot_5

Connectivity

  • Option to connect up to 16 cameras in the SAFETIS system at once
  • Streaming in real time from all SAFETIS cameras at once
  • 7 additional digital outputs

Configuration

  • Graphs of temperature courses in real time from any points or areas of interest
  • Setting the position of individual PTZ cameras
  • Setting of all parameters for all cameras, including alarms, areas of interest and other parameters

SAFETIS system components

The following thermal cameras are included in the SAFETIS system:

  • The following thermal cameras are included in the SAFETIS system:
  • SAFETIS Outdoor, i.e. exterior version of the cover with high level of protection
  • SAFETIS Indoor, i.e. interior version and also
  • SAFETIS Outdoor Pan-Tilt, i.e. version with high level of IP 67 coverage and PTZ positioning system.
PS_55
Ukázka obrazovky z jednotky SAFETIS Control Unit. K jednotce je aktuálně připojeno 16 termokamer, jejichž obraz je pozorován v rámci jedné přehledové obrazovky. V pravém horním rohu obrazovky je zřejmé, že systém hlásí alarm.

In addition, the offer includes a further two special thermal cameras. One of these is SAFETIS Stainless Steel. The protection cover of this camera is designed to provide resistance under external conditions in special fields of industry where there are highly corrosive influences or the occurrence of aluminium is prohibited. This camera is adapted for demanding outdoor use with a high level of coverage.

The second special thermal camera is SAFETIS EX-proof – a specially modified cover enables to install the camera in an environment with the risk of explosion where it is necessary to comply with strict standards. This camera has ATEX certification.

General information 
Up to 16 SAFETIS cameras can be connected (2 versions available, up to 8 or up to 16 cameras)
High performance Quad Core industrial control unit with preinstalled SAFETIS Software
Fan-less, Plug and Play system for easy DIN-RAIL and Rack installation
System
ProcessorIntel® Quad Core i7-6820EQ/i5-6440EQ Processor (Skylake-H)
ChipsetIntel® CM236
Memory16GB DDR4
Camera and Display/Monitor connection
SAFETIS camera communication8 or 16 independent ETH RJ45 LAN ports
Display/Monitor interfaceDVI-D : Up to 1920 x 1200 @ 60Hz 
DisplayPort 1 : Up to 4096 x 2304 @ 60Hz
DisplayPort 2 : Up to 4096 x 2304 @ 60Hz
PT (Pan Tilt control) and Alarm interface
Serial4 COM RS-232/422/485
Ethernet2 ETH LAN RJ45 connectors
Digital Outputs8 Isolated Digital Alarm outputs
Additional functions
DVR recording4 TRAY slots for easy disk changing (max 4 x 2TB)
Remote controlRemote power and reset switch
Audio InterfaceRealtek ALC892, 5.1 Channel HD Audio 1 Line-out
Power
Power Input6V to 78V, DC-in
Power Interface3-pin Terminal Block : V+, V-, Frame Ground
Surge ProtectionUp to 200V/1ms Transient Power
Mechanical
Dimensions (W x L x H)260mm x 215mm x 79mm
Weight4.5 kg (9.92 lb)
MountingDIN-Rail or Rack mounting bracket
Environment
Operating Temperature-25°C to 70°C
Storage Temperature-40°C to 85°C
Humidity95% @ 70°C
VibrationIEC 60068-2-64; SSD : 5Grms, 5Hz to 500Hz, 3 Axis
CertificationCE, FCC, EN50155, EN50121-3-2
SAFETIS CONTROL UNIT – main software functions
Camera configurationCamera is completely configured via SAFETIS Control software that is preinstalled on SAFETIS Control Unit
Number of camerasUp to 16 cameras connected to single SAFETIS Control unit
Monitoring and alarmingAdvanced analytics functions, Extreme detection, MAX/MIN evaluation, Dynamic/Static measurements, User Control Table (Logical rules for PLC connection), Selectable digital outputs for specific ROI measurement analysis
Advanced analytics functionsYes, eliminating of non-alarm triggers, eliminating of moving objects etc.
Graphical alarm visualizationYes
RecordingPre-alarm recording function allows to start recording before the alarms appear
Image recordingYes
Fully radiometric recordingYes
LoggingYes
VisualizationReal-time video streaming from up to 16 cameras, Pallet settings, Overlay elements, Digital zooming, Numeric and statistical indicators
Visualization on desktopVisualization can be reorganized according to customer wish
Graphs visualization from ROIYes,
ROIUser definable measurement area (Point, Line, Polyline, Rect., Polygon, Circle)
Digital outputs8 digital outputs on SAFETIS Control unit, 7 digital output on each SAFETIS camera simultaneously

Format Name Size Link
pdf icon Datasheet 1,1 MB DOWNLOAD

Copyright © 2017 Workswell s.r.o.

Back to Top