Workswell FS-SMARTIS/EX-SMARTIS – Smart Thermal Imaging System

ATEX_horni obrazek

Workswell SMARTIS (Smart Thermal Imaging System) is the first sample of a new category of so-called intelligent thermal cameras. It is an all-in-one solution featuring a thermal camera, control unit, I/O card, as well as a TPC/IP interface integrated within a single casing including an in-built webserver allowing for communication with a superior system, including any PLC with this interface.

Workswell SMARTIS thermal camera can be operated and configured independently without the need for connection to a PC or a superior unit. The thermal camera is offered in resolutions of 160 x 128 px, 336 x 256 px a 640 x 512 px and an LWIR microbolometer of the spectral range of 7.5 – 13.5 μm has been used as an optical sensor.

INQUIRY   FOV Calculator

The Workswell SMARTIS thermal camera is designed for fire protection for landfills, incinerators, warehouses, as well as a control condition in the foundry ladle and more. The thermal camera has been designed for use in process automation in such a way that it can autonomously control a smaller process or its part or become a part of the control system. For this reason, it has been equipped with a TCP/IP interface (Ethernet 100Mb/sec, RJ-45) and also complemented with digital inputs and an analogue output (current loop 0-24 ma/12 V).

The measurement scope of the thermal camera ranges from -25 °C to 550 °C, optionally up to 1500 °C. Metrologic accuracy (±2% or ±2°C) and sensitivity (up to 50 mK, i.e. 0.05 °C) have stood as priorities in the thermal camera’s development.

ATEX_dolni obrazek

The In-Built Webserver

The Workswell WIRIS thermal camera contains an in-built webserver enabling a complete setting of the thermal camera, including measurement functions, inputs and outputs and image streaming options.


  • Tower and warehouse protection
  • Material storage system control
  • Waste and coal conveyers
  • Waste and coal bunkers
  • Perimeter monitoring
  • Agricultural landfilling
  • Ladle integrity control
  • Critical slag detection


Communication Interface

  1. 4x current output (0-24 mA/12 V current loop)
  2. 7x digital output (with an open collector)
  3. 4x digital input/output for trigger
  4. Ethernet TCP/IP with a RJ-45 connector for communication with PLC, but also with the in-built webserver


  • An in-built webserver for the setting of the thermal camera and visualisation of the data measured
  • A TCP/IP interface for communication with a superior system
  • digital inputs/outputs enabling triggering and alarm outputs
  • Temperature measurement up to 1500 °C, calibrated within the full temperature scale
  • A wide spectrum of measurement functions (temperature profile, measurement point, areas enabling minimum and maximum assessments etc.)

Resolution160 x 128 pixels336 x 256 pixels640 x 512 pixels
Image Frequency30Hz9Hz, 30Hz or 60Hz9Hz, 30Hz
Temperature ranges-25°C to +150°C, -40°C to +550°C,
optional extended temperature range +400°C to +1 500°C (filter)
Temperature sensitivity0.05°C (50mK)
Accuracy±2% or ±2°C
Spectral Range7.5 – 13.5 μm
CalibrationYes, the system includes the calibration certificate
Detector TypeUncooled VOx microbolometer
Optics (FOV)12°, 17°, 25°, 30°17°, 25°, 35°, 45°32°, 45°, 69°
FocusContinuous Manual (fixed focusable, min focus distance depends on lens)
SMARTIS Communication and Power supply
NetworkingEthernet 100Mb/sec, RJ-45, Metal cable gland protection
Analog output4-channel isolated Current loop (0-24mA) / Voltage (±12VDC, M12 circular thread)
Digital output7 x Isolated open collector output (max 40 VDC), M12 circular thread
Digital inputs4 x isolated high-voltage trigger inputs (max 36 VDC), M12 circular thread
Supply input230 Vac, < 4 W (max. 5 W during NUC calibration), M12 circular thread
SMARTIS Built-in Functions
Camera configurationBuilt-in WEBserver for easy and fast sensor configuration, Google Chrome or Firefox browser compatible, no external software required
Monitoring and AlarmingExtreme detections, MAX/MIN evaluations, Dynamic/Static measurements
User Control Table (Logical rules and PLC features)
Selectable digital outputing for specific ROI result (OR/AND operators)
SynchronizationContinuous (periodical or fullspeed) or Triggered (Start/Stop, Latching)
VizualizationRealtime video streaming, Pallete settings, Overlay elements, Digital zooming, Numeric and statistical indicators, Input and Output overview panel
SecurityAdministrator/Operator password, locking functions
Image CorrectionNon-Uniformity Correction asynchronous/synchronous/triggerable
ROIUser definable measurement area (Point, Line, Polyline, Rect, Polygon, Circle) Multiple product selection for ROI presets (Manual or via Ethernet)
OthersRealtime Clock, Emissivity correction, Multiple languages
SMARTIS Physical Data
Dimensions and weight (FS)Fire-safety app., 493 x 175 x 168 mm, 5.3kg, durable aluminum body
Dimensions and weight (EX)ATEX Fire-safety app., 483 x 172 x 167, 17.4 kg, stainless steel
MountingMore information written in detail housing data sheets
Operating Environment and Packaging
IP protection (Encapsulation)IP67 with cable glands
Operating temperature-20°C to +50°C
Storage temperature-30°C to +60°C
Humidity5% to 95% non-condensing
List of contentsFS-SMARTIS or EX-SMARTIS 640/336/160 px model with lens, Standard Calibration certificate, 1x Power supply cable 5-pin (2 meters), 1x Ethernet UTP5 cable (5 meters), Quick start guide, Transport case

Resolution 640 x 512 pixelsField of viewSpatial resolutionPixel size
Focal length 9 mmFOV 69° x 56°1.889 mrad from 1 meter1.9 mm from 1 meter
Focal length 13 mmFOV 45° x 37°1.308 mrad from 1 meter1.4 mm from 1 meter
Focal length 19 mmFOV 32° x 26°0.895 mrad from 1 meter0.9 mm from 1 meter
Resolution 336 x 256 pixelsField of viewSpatial resolutionPixel size
Focal length 6.8 mmFOV 45° x 35°2.267 mrad from 1 meter2.3 mm from 1 meter
Focal length 9 mmFOV 35° x 27°1.889 mrad from 1 meter1.9 mm from 1 meter
Focal length 13 mmFOV 25° x 19°1.308 mrad from 1 meter1.4 mm from 1 meter
Focal length 19 mmFOV 17° x 13°0.895 mrad from 1 meter0.9 mm from 1 meter
Resolution 160 x 128 pixelsField of viewSpatial resolutionPixel size
Focal length 6.8 mmFOV 30° x 24°3.333 mrad from 1 meter3.4 mm from 1 meter
Focal length 9 mmFOV 25° x 20°2.778 mrad from 1 meter2.8 mm from 1 meter
Focal length 13 mmFOV 17° x 14°1.923 mrad from 1 meter2 mm from 1 meter
Focal length 19 mmFOV 12° x 9.5°1.316 mrad from 1 meter1.4 mm from 1 meter
FOV Calculator

pdf iconDatasheet2,0 MBDOWNLOAD
pdf iconWorkswell WHTC IP677,0 MBDOWNLOAD
pdf iconWorkswell EX-WHTC7,0 MBDOWNLOAD
pdf iconDrawings7,0 MBDOWNLOAD
pdf iconUser manual4,7 MBDOWNLOAD

Back to Top